Description

Characteristics:
KS-50 Brushable Seam Sealer is a synthetic rubber-based sealant that can be applied with a paintbrush. This quick-drying product creates an elastic, heat and cold-resistant ( -25° C to +80° C) layer that can be painted over and is impervious to water and mineral spirits.

Color: Gray
Drying time: 12 hours
Quantity required: 1.2 kg/m2
The drying time depends on the layer thickness and ambient conditions. At 1mm wet layer thickness the drying time is ca. 12 hours (at 68°F and a relative humidity of 65%)

Application:
The surface must be clean, dry, and free of grease and oil. Apply the product with a paintbrush on bare metal or primed/painted metal surfaces. Brushable Seam Sealer will not drip or become stringy. You can paint over the sealer as soon as it dries. Do not apply at temperatures below 59° F.

*** Technical Documents & Safety Sheets *** 

Materials Safety & Data (MSDS) |  Technical Data Sheet (TDS)